Changing pot soil

The time to replace the potting soil is associated with signs. Many plants need to change the pot after a while. Because they can no longer provide the food they need. Usually, plants need to change the potting soil when they do not respond to irrigation and establishing environmental conditions. With this replacement, life returns to the plant. This replacement must be done on time. In this case, the required materials are provided to the plant. To get to know the important points about changing the potting soil, please follow the rest of the article.

What you will read in this article

Important tips in changing potting soil

To replace the potting soil, you must consider the appropriate size for the chosen pot of the plant. The diameter of the opening of the pot should be 2.5 to 5 cm larger than the plant. Plants show symptoms when they are faced with poor soil and inappropriate place in the pot. When you see these signs, change the pot.

Signs of pot replacement

When a white substance similar to mold is seen on the soil or white patches appear uniformly, this indicates the impoverishment of the soil.

The plant has grown very tall and is much higher than the pot. In this case, there is a possibility of losing the plant due to breaking and bending. Therefore, it is better to change the plant pot.

When the roots of the plant are very tangled and the plant does not have enough space to grow, then you should also think about a pot with suitable soil. Of course, you will see this entanglement if you find it under the pot. However, symptoms such as low growth and stoppage of plant growth also occur due to lack of sufficient space for the plant.

Changing potting soil

First, choose a suitable environment for the exchange. Next, put a newspaper or plastic on the ground. Provide the desired pot for the plant.

Keep the mixed soil prepared for the plant with you. Next, fill the bottom of the pot with some prepared soil.

To keep ornamental flowers like roses, first cut off the extra petals and make a slit at the end of the stem. It is better not to have a razor at the end of this stem. Put the stem in the water.

Cut bulbous flowers like lilies at the end of the stem. Now wait for the white sticky substance to come out. Wash it and put it in water.

The iris is cut diagonally in the stem area. Then put the lily in the water in the opened form. Squeeze the lily flower flag with your hand. Because these pollens will stain the petals and reduce the beauty of the flower.

Burn the end of the anemone flower stem with a lighter or a match until this area becomes completely ash.

Cloves will keep their freshness for a long time. You can separate the ends by hand without using scissors.

To water the pots, leave the water in the room for an hour. This work causes the temperature of the water used by the plant with the environment.

It is better to leave the plant water in the open air for 24 hours before use. Because in this case, water chlorine is lost. Chlorine in water causes brown leaf tips in plants.

It is better to use eggshell to strengthen the soil of the pot. This shell has a valuable mineral for the plant and it is better to mix it with the soil.

Choose the spring season to change the potting soil. In this season, the plant is able to repair and restore the injuries and damage caused to the body. Because there is sap in the plant.

For replacement, check pots for opening, height and end section. The opening diameter of the pots is offered in 7, 9, 12, 20, 25 and 30 cm varieties.

Pay attention to the material of the pot to replace the potting soil. The material of the pot is selected according to the environment of the plant, sensitivity of the plant, etc. These vases are made in different materials such as plastic, wood, fiberglass, glazed and unglazed clay type.

If you intend to use used pots to replace potting soil, first clean it of previous deposits and wash it with soap and water. After drying, use the pot for further work.

Plastic pots have the ability to coordinate and have a greater effect in the home environment and in the area of ​​apartments. Because they are produced in a variety of colors.

Clay pots allow the intervention of air and water flow. They are offered in a traditional way and have a heavy texture. At the same time, they are less injured. Glazed pots are used a lot to change potting soil.

New pots should be immersed in water before use so that enough water penetrates into its layers and there is no need to use water.

Focus on the bottom of the pot. To drain the water and prevent the blocking of this vital area for plant growth, close it with a piece of slippery rock or sandpaper. This makes the outlet of the pot always open.

Before changing the pot soil, you should fill the pot with water one day before. Next, hold the end of the vase with your left hand. Then invert the pot. Now tap the back of the pot to remove the plant.

Gently separate the old soil from the plant. Take care of the roots. Place the plant in the provided pot. Next, add the prepared moist soil to the pot. Use your hand to compact the soil and shake the pot.

Do not water the plant for two days after this. This is done to spread the roots. If the environment is very hot, you can try dusting.

If for any reason the bottom of the pot closes and the soil turns into a swamp, remove excess water by shaking a stick at the bottom of the pot. This will release the water trapped in the pot.

After changing the potting soil, throw away the water under the pot regularly. If for any reason, such as the pot being too heavy, the season not being right, not having time, and the plant being too big, it is not possible for you to move the pot, replace the old and poor soil of the plant with rich soil as much as possible. .

اکوپیت